CX-WC13AXSM Kit

The WC-13AXSM barrier free washroom control kit includes all the components needed for a complete installation, including: a control relay, activation switches, LED annunciation and electric strike and power supply signs. The WC-13AXSM kit can be combined with the WEC10K2 universal emergency call kit. Door operator not included.

Please contact or visit www.camdencontrols.com
for product and warranty details.

Brand:
Brands
Categories: , , ,

KIT INCLUDES

CM-250/4854SE1
PUSH TO OPEN and PUSH TO LOCK push plates with LED illuminated enclosure and sign

  • 2×4″ (51×106 mm) push plates
  • Surface mounted enclosure with blue/red/green illumination
  • Field selectable LED illumination (idle or active)
  • Audible switch activation confirmation (selectable ON/OFF)
CM-45/454SE1
PUSH TO OPEN push plate with LED illuminated enclosure and sign

  • 4 1⁄2″ (114 mm) square heavy guage stainless steel faceplate
  • UL/CSA Approved switch
  • Rated 150 mA @ 30 VDC
  • Surface mounted enclosure with blue/red/green illumination
  • Field selectable LED illumination (idle or active)
  • Audible switch activation confirmation (selectable ON/OFF)
CX-MDA
Magnetic contact

  • Surface mounted, SPST contact
  • 15⁄16″ (23 mm) gap
CX-33
Advanced logic relay

  • Ideal for most automatic door applications, as well as airlock and other security applications
  • 15 operating modes, with sub-modes. Selection and configuration with 3 push buttons
  • Easily sequence multiple inputs with multiple maintain and hold outputs
  • Large 3 segment (blue) LED display
  • Selectable time delays, with delay on input activation
  • ‘Tried and true’ power circuitry ensures outstanding power filtering and surge protection
  • Larger terminal strips allow larger wire gauge, or more conductors to be connected
  • Clear plastic case provides better protection of circuit board and easy mounting

DOCUMENTATION

Product Page (Specialties)

downloadA.300

For more information visit: www.camdencontrols.com

Disclaimer
  • We recommend that physical hardware be ordered and verified before starting any preparation, manufacturing or installation work.
  • All product installations must be done by qualified personnel using the proper mounting hardware for the appropriate surface or material.
  • We recommend that installers and manufacturers use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify product or information without prior notice.
  • Do not exceed the maximum weight or dimensions recommended by the manufacturer.
  • All technical documents, drawings and instructions are provided as-is. Customers (primary or secondary) cannot derive any claim based on the use of these documents. No responsibility is or will be assumed.