<strong>JC-603QC-BB1079</strong></br>POWER TRANSFER
NEW

JC-603QC-BB1079
POWER TRANSFER

Installed in the center hinge position of a door, the JC-603QC-BB1079 Power Transfer Hinge provides the concealed wires required between a hollow door and its frame, for the purpose of powering and monitoring electrified door hardware.

 

Categories: , ,

FEATURES

  • Standard weight, full mortise
  • 5 knuckles, 2 ball bearings
  • Steel with non-removable steel pin
  • ANSI/BHMA A156.7 template hole pattern
  • UL Security Listed
  • For hollow door and frame
  • 8 or 4 wire transfer with molex connector
  • Wood and undercut machine screws included
  • Must be installed with two other ball bearing hinges of the same size

OPTIONS

ETW04: 4 Wires
ETW08: 8 Wires

Wiring Details

  • Wiring: 28 AWG stranded w/PTFE insulation, NEMA HP-3
  • Maximum Amp: 4 amp continuous for wires up to 9in (228.6mm) @ 24v AC or DC
    EX: 8 wires = 0.5amp / wire
  • Maximum Surge (in-rush): 16amp pulse for 300msec / 10amp pulse for 250 msec.

DOCUMENTATION

Product Page

download04.620

Installation Instructions

downloadJC-603QC-BB1079 Series – Installation Instructions

Disclaimer
  • We recommend that physical hardware be ordered and verified before starting any preparation, manufacturing or installation work.
  • All product installations must be done by qualified personnel using the proper mounting hardware for the appropriate surface or material.
  • We recommend that installers and manufacturers use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify product or information without prior notice.
  • Do not exceed the maximum weight or dimensions recommended by the manufacturer.
  • All technical documents, drawings and instructions are provided as-is. Customers (primary or secondary) cannot derive any claim based on the use of these documents. No responsibility is or will be assumed.